18 thousand hectares of forest will be restored in Karelia this year.
Karelian company plans to displace reinforced concrete poles of power lines from the Russian market.
When a tree is harder than a stone. Karelia is ready to "stake out" Russia on the Finnish technology.

Marking wooden poles with SIGNUMAT equipment

The details of the poles manufactured by the Seesyarvskiy Poles Impregnation Plant are subject to mandatory marking
Marking of poles details should contain the following information:
- name or brand of the manufacturer;
- length in meters and type (L, M, S) of poles details;
- batch number and year of impregnation;
- type or name of the preservative;
- name or brand of impregnator.
The marking of the poles details on the Seesyarvskiy Poles Impregnation Plant is carried out with the SIGNUMAT system of the Austrian company "Latschbacher".

The SIGNUMAT system of the Austrian company "Latschbacher" is known in Russia since the 1990s of the 20th century as the most simple and reliable method of marking wood. Marking of supports is carried out with SIGNUMAT hammer and tags. Tags are made of metal.

With the SIGNUMAT hammer, tags are retrieved one at a time from the auto-feed store, with a capacity of 40 tags. By easy hammer push into the slot, the tag is secured through external pins on the end of the hammer. With one hammer blow, the tag is securely attached with its internal pins to the wood in any conditions. The reliability of fastening is guaranteed when using long special pins and the method of crimping.

The complete set of the proposed marking system consists of:

  • Special marking hammer
  • Holder with auto-delivery for 40 tags (cassette)
  • Plastic bag with spare tags for 200 pieces

Hummer SIGNUMAT Cassette SIGNUMAT Bag SIGNUMAT Assembled

The marking process is as follows:

The tag is loaded into the auto feed holder. From the auto-feed holder, the marking tags are fed one by one and with the help of technological teeth are mounted on the head of the hammer by pressing it on the upper tag in the holder. After this, with one light hammer blow, the tag is attached to the wood with the help of working teeth. The ball joint in the hammer head ensures a smooth nailing of the tag. The design of the hammer provides for the installation of the tag even at a slight angle to the surface, which greatly simplifies the work.

A simple and easy-to-use tool kit "Signumat" allows you to mark the poles quickly and efficiently in all weather conditions. The main question solved by the brand SIGNUMAT fast, accurate, weatherproof and economical marking of wood!